：+86 021-31170068
： www.shqhvalve.com
：sales@shqhvalve.com
Y-type Flange Filter
Product overview
Y-type flange filter is a filtering device necessary for the use of hydraulic control valves and sophisticated mechanical products that are prone to clogging. It is usually installed at the inlet end of the hydraulic control valve and other equipment to prevent particulate impurities from entering the channel, causing blockage, and causing the valve or other equipment to malfunction and cannot be used normally. It has the characteristics of simple structure and small flow resistance, which can remove dirt online without dismantling.
Product Features
1. The valve body adopts full channel and streamline design, with small fluid resistance and large flow rate.
2. The joint of body, cover and piston rod is double sealed by sealing gasket and sealing ring without leakage.
3. Double guide of valve body, piston cylinder and piston ensures stable and reliable movement.
4. All stainless steel piston cylinder, integral casting piston and NBR sealing ring. Perfect combination greatly prolongs service life.
5. The detachable valve seat with advanced technology has ingenious structure, novel conception and convenient maintenance and replacement.
6. For the piston cylinder with guide hole, properly increase the resistance to make the piston movement more stable.
Execution Standard
Design spec：HG/T21637-1991
Flange end：GB/T17241.6\API 598 GB/T 9113
Test & check：GB/T13927
Performance Parameter
Nominal diameter：DN20~400mm
Nominal Pressure：PN1.6～2.5MPa
Applicable media：Water and media with physical and chemical properties similar to water
Applicable temperature：-80≤450℃
Main materials：Gray cast iron, ductile iron, carbon steel
